Curse

Jessica Pariah · Sep 29, 2006, 08:02 PM // 20:02

Hi guys, I've recently downloaded ' Advanced System Optimizer 2 '.
I installed it, used it with great pleasure of a speed buff and now.. well.. I clicked the button that when I put off my computer, it will also put off the power. When I start up my computer, it forces the computer into the boot menu, I need to click Safe Mode or I wont be able to get to the blue screen with white letters.

What I get is;

Quote:

An error has been occured. Windows has been shut down to prevent damage.

UNMOUNTABLE_BOOT_VOLUME

If this is the first time you see this screen with an error,
You have to reboot your computer. If this screen pops up again, the best you could do is;

Control if all new hardware or software are installed on the right way. If this is a new installation, ask your retailer if there are any new Windows-updates you need.

If this problem continues to occur, you need to delete all hardware/software or turn them off. Put off BIOS-memory options like caching or the creating of shadow copies.

If you must use Safe Mode for putting off or deleting the hardware/software, you need to reboot your computer, press F8 and look at the advanced boot options, then click Safe Mode.

Technical Information (Possibly in English):

*** STOP: 0x000000ED (0x81F737B8,0xC0000032, 0x00000000, 0x00000000)

If anyone is able to help me get past this or even getting rid off it, PLEASE HELP! This is just a slow, old computer I'm using for situations like this.

I know I totally messed up, but don't blame me, I'm also human.

Greetings,
Jessica Pariah

PS: Please help guys, It's VERY much appreciated!
PPS: I hope my translation of the blue screen is well enough,

Tarun · Sep 30, 2006, 03:43 AM // 03:43

Jessica, you're having an issue with your file system. You can get this easily repaired.

In this case, restart the computer to the Recovery Console, and then use the chkdsk /r command to repair the volume. After you repair the volume, check your hardware to isolate the cause of the file system damage.

To do this, use the following steps:

Start your computer with the Windows startup disks, or with the Windows CD-ROM if your computer can start from the CD-ROM drive.
When the Welcome to Setup screen appears, press R to select the repair option.
If you have a dual-boot or multiple-boot computer, select the Windows installation that you want to access from the Recovery Console.
Type the administrator password when you are prompted to do so.

NOTE: If no administrator password exists, press ENTER.
At the command prompt, on the drive where Windows is installed, type chkdsk /r, and then press ENTER.
At the command prompt, type exit, and then press ENTER to restart your computer.

If this procedure does not work, repeat it and use the fixboot command in step 5 instead of the chkdsk /r command.

How to use the Recovery Console

cannonfodder · Sep 30, 2006, 08:02 AM // 08:02

Jessica,

I will close this thread for one reason Tarun's advice is spot on..

What I don't want is others trying to confuse the matter by giving other options

Send me a PM, if for any reason this does not work and I will re-open the thread.

cannonfodder