Curse

Judas Hawksriff · Jun 08, 2005, 10:56 AM // 10:56

64bit isn't offically supported/tested

Dirkiess · Jun 08, 2005, 11:34 AM // 11:34

Quote:

Originally Posted by strikegun

I tried Windows XP 64 and Windows XP prof. (32bit) At this time it runs now on 32bit.
I had first it running on my raid. Since 1 week it runs on my normal disk.

Just found this interesting review on your mobo.

Take a look and see if anything there can help you resolve any possible oddities that you may have done when installing the board. Maybe it will help you out a little.

Obviously will think on a few other solutions in the mean time, but it can't hurt to try some of the things they mention. It's an interesting bit on the Dimm Slots in the way they do and don't funtion very well. Could be an issue here?

Take a look here.

http://www.insanetek.com/index.php?p...utnf4ultra-d_1

Dirkiess · Jun 08, 2005, 11:59 AM // 11:59

Quote:

Originally Posted by strikegun

ok, here are mine:

AMD64 +3000 (Artic Cooler)
DFI Lanparty UT Nf4 Ultra-D (BIOS 2005/05/10)
2x 512 MB Kingston CL3 (Dualchannel Mode)
ATI Radeaon X700 128MB (Artic Cooler)
2x SATA Maxtor 160GB (Raid0); PATA Maxtor 200GB
Powersource 420W

Not Overclocked or something, runnning with default specifications

I was just looking at the DFI website for some details on this board and was checking out the BIOS details.

It says on the web that the BIOS is the 10/03/05. Is this the same on your board or as you say above, 2005/05/10??

If the BIOS is 2005/05/10, where did you get it, as I can't see it on there website, and if that is the date, maybe you should try rolling back to the BIOS as specified on there website. Maybe you have any iffy BIOS?

strikegun · Jun 08, 2005, 01:10 PM // 13:10

@Dirkiess
nice of you to take that time.
I found on a special DFI Forum page a newer BIOS from 10 may 2005 wich I flashed, but it didn't done anything better.
http://www.dfi-street.com/forum/index.php?s=

I can't find the part of the DIMM-thing wich you meant in the link of the review.
Perhaps you can copy it for me here?
thx

strikegun · Jun 09, 2005, 08:46 AM // 08:46

Question:
The lable of the RAM (2x Kingston KVR400X64C3A/512) says 1.8V
My Board can do only min. 2.5V
Does anyone knows if that is ok?

strikegun · Jun 09, 2005, 10:17 PM // 22:17

I swapped my RAMs with some from my company. I got now 2x 512Mb with CL2.5.
I had no crashes anymore. Seems to be stable.
Finaly gameplay for ~7hours ;-)
Good night

Helios Skyfire · Mar 07, 2008, 06:27 AM // 06:27

Was this issue solved? I am having it. As well as another crash with says Dx9Tex.cpp(1232)

Brianna · Mar 07, 2008, 06:59 AM // 06:59

Holy cow thread necromancy!

Just make your own thread Helios, and post your problems/concerns there.