Guild Wars Forums - GW Guru
 
 

Go Back   Guild Wars Forums - GW Guru > Forest of True Sight > Technician's Corner

Notices

Closed Thread
 
Thread Tools Display Modes
Old May 19, 2005, 09:54 AM // 09:54   #1
Pre-Searing Cadet
 
Join Date: May 2005
Advertisement

Disable Ads
Default If your game is choppy/laggy and you've tried everything...

Make sure the AGP Aperture size in your BIOS is set to the size of your video card. I read 4 different forums trying to solve my problem with this, and checking my bios for turning Fast Write off i noticed my Aperture was set to 64mb instead of 128 (Running 5900SE 128mb AGP card )

Changing this setting eliminated my lag/choppy problems.

I cant say this will solve your problem, but its something i havent seen mentioned and it solved mine.
Noktaris is offline  
Old May 19, 2005, 10:02 AM // 10:02   #2
Ascalonian Squire
 
Join Date: May 2005
Location: Melbourne, Australia
Profession: W/Mo
Default

Yeah, this is a typical case of choppiness and lag. Good thread
Seth3 Errow is offline  
Old May 19, 2005, 04:24 PM // 16:24   #3
Krytan Explorer
 
aeroclown's Avatar
 
Join Date: May 2005
Location: Louisiana
Profession: E/Mo
Default

actuallly it should be double your physical onboard memory.
aeroclown is offline  
Old May 19, 2005, 05:51 PM // 17:51   #4
Exclusive Reclusive
 
Serafita Kayin's Avatar
 
Join Date: May 2005
Location: Tuscaloosa, AL
Guild: Seraph's Pinion (wing)
Profession: R/Me
Default

In certain cases.

If you run a 256 meg card, 128 is sufficient.

128, 128-256.

And below 128, half system resources.

Good information, and technically true, but i find those settings work best for gaming, benchmarking they get done a bit differently.
Serafita Kayin is offline  
Old May 19, 2005, 09:01 PM // 21:01   #5
Ascalonian Squire
 
Dingo Dave's Avatar
 
Join Date: May 2005
Guild: Raging Pheonixes Guild
Profession: E/Mo
Default

now, i thought you were meant to set it too half of your system memory?
Dingo Dave is offline  
Old May 19, 2005, 09:05 PM // 21:05   #6
Krytan Explorer
 
ElRey's Avatar
 
Join Date: May 2005
Location: Outside your window
Guild: First Degree [FiR]
Profession: W/Rt
Default

how do u check the bios and what is it se to and how do u change it
ElRey is offline  
Old May 19, 2005, 11:14 PM // 23:14   #7
Ascalonian Squire
 
Dingo Dave's Avatar
 
Join Date: May 2005
Guild: Raging Pheonixes Guild
Profession: E/Mo
Default

on powering up your computer you will be presented with a screen (POST screen i think). At the bottom of this it says Press Del to Enter Setup, or something along those lines. Press that before bottup goes any further and you will be taken into the BIOS. From here it is under one of the headings, i think mine is advanced power options or something like that.
Dingo Dave is offline  
Old May 20, 2005, 04:28 PM // 16:28   #8
Frost Gate Guardian
 
Svenn's Avatar
 
Join Date: May 2005
Location: near Atlanta, GA - USA
Guild: Dark Entities (DE)
Profession: R/Mo
Default

AGP aperature size is under Advanced Chipset Options in my BIOS (Award). I did some research on this interesting issue in re to gaming yesterday, and there is no clear-cut answer. Much of the info you can Google is outdated and may not apply to contemporary cards, system RAM and operating systems. My advice is to keep tweaking it, play for an hour or so and then tweak it again, until something seems to work better than others.

Let me back up a sec and talk about what this setting is. The aperature size is part of the AGP protocol that was developed basically to help struggling video cards share the burden of complex textures with the system RAM. In other words, with the video RAM filled, some of the data could be shifted to the system RAM as relief. The aperature size is the amt of system RAM that can be allocated for this purpose. When the AGP standard was written, both commonly available video RAM and system RAM were fairly limited, so you had to strike a balance for best performance. For many people, these conditions no longer exist or have been substantively modified, so the old advice may not apply.

In my case, I have a new GeForce 6800 GT 256mb. My BIOS had been set at a default 64mb AGP aperature, and I bumped it up to 256mb as soon as I got the card installed. Several things that I read confirmed SK's comment that certain settings are good for max benchmarking scores, and others for optimal gaming performance. Opinions are all over the place, and you have to collate, synthesize and draw your own conclusions for your own particular system.

My conclusions based on what I read: 1) Most video cards have much more adequate memory now, 2) Using video RAM is faster than system RAM, and 3) Modern games are challenging video cards in different ways...not frequently requiring complex textures to be partitioned to the system RAM.

I took my aperature from 256 to 32 to 64 then back to 32. The differences were subtle enough to be my imagination. However, I felt like 32mb stuttered in game less often than the other settings. FWIW, the stuttering could be caused by brief server lag, latency issues or my cable node momentarily maxing out. The game didn't crash, and that makes me happy.

Some people advocated entirely disabling the aperature (setting to zero), but my current BIOS doesn't support anything less than 32.

Edit: I'm currently running 1gb system RAM.

Last edited by Svenn; May 20, 2005 at 04:30 PM // 16:30..
Svenn is offline  
Closed Thread

Share This Forum!  
 
 
           

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
help with my Laggy PC Jimma Technician's Corner 3 Jan 23, 2006 11:55 PM // 23:55
help with my Laggy PC Jimma Technician's Corner 0 Jan 22, 2006 08:39 PM // 20:39
Noktaris Technician's Corner 20 May 30, 2005 08:27 PM // 20:27
DarkzCloudz Technician's Corner 6 May 07, 2005 06:02 PM // 18:02
Game=Smooth, Textures=Choppy Aragog Technician's Corner 1 May 01, 2005 06:37 AM // 06:37


All times are GMT. The time now is 05:39 PM // 17:39.


Powered by: vBulletin
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
jQuery(document).ready(checkAds()); function checkAds(){if (document.getElementById('adsense')!=undefined){document.write("_gaq.push(['_trackEvent', 'Adblock', 'Unblocked', 'false',,true]);");}else{document.write("