Guild Wars Forums - GW Guru
 
 

Go Back   Guild Wars Forums - GW Guru > Forest of True Sight > Technician's Corner > Hardware

Notices

Reply
 
Thread Tools Display Modes
Old Jun 22, 2008, 11:17 AM // 11:17   #1
Sab
Desert Nomad
 
Sab's Avatar
 
Join Date: Dec 2005
Advertisement

Disable Ads
Default Monitor Problem

I'm currently using my small monitor because my main one (Asus VW191S) has been having problems. What happens is, when it's turned on, it functions normally for about five seconds, then the screen goes black. I've examined the screen closely and it turns out that it's still displaying the images, it's just extremely dark and nearly impossible to see without a torch/flashlight.

There's no problem with cables - all the pins are straight, and they're all plugged in firmly, I've tried many different cables etc. The power is adequate, and I've tried the monitor on three different computers, all with the same result.

So I'm guessing the LCD backlight is stuffed. What should I do? I could:

- Send it back to Asus and get it replaced. The problem is that I'll likely have to ship it overseas and take a couple of months, costing hundreds of dollars (shipping + possible expired/voided warranty).

- Get this fixed locally. There might be some electronics shop which can do this. But then again, something might go wrong again later on and I'll end up in this same situation.

- Buy a new monitor. If so, what are the reliable names in this field? Or better yet, help me select a few here. I'd be looking for a mid-range, 19-22", and most of all a reliable one that will last a while.

Thanks

Last edited by Sab; Jun 22, 2008 at 11:22 AM // 11:22..
Sab is offline   Reply With Quote
Old Jun 22, 2008, 12:04 PM // 12:04   #2
Insane & Inhumane
 
Brianna's Avatar
 
Join Date: Feb 2006
Default

Sounds that your monitor has just died.. I'm not that fond of Asus.

If it is borked, it is probably better to just buy a new one, you mention hundreds of dollars to ship it out and get it fixed in the first option - waaaaay not worth it.

Secondly, if it can be locally fixed.. i'd be surprised, and like you said, it could get borked again later.

I'd just buy a new one, I could recommend Samsung, I own a 22 inch Samsung 2220WM-HAS and it rocks, but there is tons of other good models out there too.

What's your budget?

I don't know exactly how to test the monitor out though.. say with diag tools or things, so this is not really my area of expertise.
Brianna is offline   Reply With Quote
Old Jun 22, 2008, 01:37 PM // 13:37   #3
Ascalonian Squire
 
Join Date: May 2008
Guild: The New Kingdoem
Profession: W/Mo
Default

sounds like the inverter board that controls the backlight is going out those only cost between 5.00 to 30 dollars and it sits normaly at the bottom front of the screen and easy to replace ebay sells them all the time i would just fix it myself if i were u cheaper than buying a new moniter
ljonesj is offline   Reply With Quote
Old Jun 22, 2008, 03:27 PM // 15:27   #4
Site Contributor
 
zamial's Avatar
 
Join Date: Apr 2006
Location: Usa
Guild: TKC
Profession: N/
Default

i like hp monitors, others like samsung those seem to be the 2 big hitters as far as a new monitor is concerned.
zamial is offline   Reply With Quote
Old Jun 22, 2008, 04:16 PM // 16:16   #5
The Fallen One
 
Lord Sojar's Avatar
 
Join Date: Dec 2005
Location: Oblivion
Guild: Irrelevant
Profession: Mo/Me
Default

HP, Samsung, ACER.

You can't go wrong. Use www.newegg.com and narrow it down by budget and manfacturer and size. If you have multiple options at that point, compare their contrast, response time, and brightness ratings. Buy the best bang for the buck. But yeh, just buy a new one.
__________________
Lord Sojar is offline   Reply With Quote
Old Jun 22, 2008, 08:06 PM // 20:06   #6
Sab
Desert Nomad
 
Sab's Avatar
 
Join Date: Dec 2005
Default

Ugh, just cracked it open to find what parts I needed, turns out I can't find and order the parts anywhere, let alone be able to replace it.

So I've narrowed it down to:

http://www.einfo.co.nz/shop/product_...widescreen-lcd
http://www.einfo.co.nz/shop/product_...-monitor-black

http://www.softwareshop.co.nz/Master...ductid=1232066
http://www.einfo.co.nz/shop/product_...ck-lcd-monitor

How do these sound, and are there any other 19-20" monitors I should consider?
Sab is offline   Reply With Quote
Old Jun 22, 2008, 08:32 PM // 20:32   #7
rattus rattus
 
Snograt's Avatar
 
Join Date: Jan 2006
Location: London, UK GMT±0 ±1hr DST
Guild: [GURU]GW [wiki]GW2
Profession: R/
Default

The bottom one - Samsung 2043 - without a shadow of a doubt
__________________
Si non confectus, non reficiat
Snograt is offline   Reply With Quote
Old Jun 28, 2008, 04:39 AM // 04:39   #8
Hell's Protector
 
Quaker's Avatar
 
Join Date: Aug 2005
Location: Canada
Guild: Brothers Disgruntled
Default

Since you've cracked it open, I guess this doesn't apply, but, a lot of weird problems with LCD displays can be cured simply by unplugging the power cable, letting them discharge for a few seconds, and plugging the power back in. It makes them do a "reset". (The main AC power cable, not the video cable.)

Outside of that, and as you suspect, the circuits that drive the backlight are probably faulty. My guess would be a bad solder joint which opens up when the current warms it up. (or a bad component.) Since you say it works for about 5 seconds, I don't think it's the light itself.
Quaker is offline   Reply With Quote
Old Jun 28, 2008, 05:41 PM // 17:41   #9
Wilds Pathfinder
 
nebuchanezzar's Avatar
 
Join Date: Jun 2005
Location: 功夫之王
Profession: N/
Default

I second Snograt, Samsung monitors have always been top-notch in my personal experience.
nebuchanezzar is offline   Reply With Quote
Reply

Share This Forum!  
 
 
           

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
shrouded^god Technician's Corner 5 Mar 21, 2008 05:44 AM // 05:44
dansamy Technician's Corner 3 Apr 21, 2007 05:47 AM // 05:47
Original Gangsta Technician's Corner 2 Apr 17, 2006 07:57 PM // 19:57
Josh Technician's Corner 1 Dec 26, 2005 06:19 PM // 18:19
New monitor, Help!! Danny_Rowe Technician's Corner 8 Aug 11, 2005 03:09 PM // 15:09


All times are GMT. The time now is 12:37 AM // 00:37.


Powered by: vBulletin
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
jQuery(document).ready(checkAds()); function checkAds(){if (document.getElementById('adsense')!=undefined){document.write("_gaq.push(['_trackEvent', 'Adblock', 'Unblocked', 'false',,true]);");}else{document.write("